Tuesday, July 15, 2008

Use MR1 as a P2P downloader

Nothing to plays on MR1 ?
An option for you to set MR1 as a P2P downloader, so you could download your favorite media from internet.

MLDonkey is the P2P client used in this package.

Steps :

1. Download Debian image, there are four .rar files. Click here go to download site...
2. Unzip the downloaded files to MR1's FAT32 partition through USB connection. [Make sure there are 1GB space available]
3. Disconnect USB connection and boot up MR1, make sure time is set at present and LAN is connected.
4. In Windows, go to the Start menu, select Run,at the command line type "telnet" [Assume MR1's IP address is]
5. Venus login : root
6. Password : AVMMR1 [case-sensitive]
7.~# /usr/local/etc/hdd/volumes/HDD1/first [MR1 will reboot after enter]
8. MLDonkey will auto start while boot up, if you don't need it, just rename mldonkey.sh in Service folder.

Note :

1. Default MLDonkey login ID is admin and PW is 1234
2. BT download is disabled in Mldonkey by default, you would need to enable it first, type "x.x.x.x:4080" in IE to access Mldonkey with WebUI, or use Sancho application as GUI connects to MLDonkey(Recommanded).
3. The image is tested with F/W version 1.08

Warning : Use it with your own risk. If something wrong casue the device not function correctly, you might have to do firmware update which will ease all data in the hard disk.

No comments: