Use MR1 as a P2P downloader

Nothing to plays on MR1 ?
An option for you to set MR1 as a P2P downloader, so you could download your favorite media from internet.

MLDonkey is the P2P client used in this package.

Steps :

1. Download Debian image, there are four .rar files. Click here go to download site...
2. Unzip the downloaded files to MR1's FAT32 partition through USB connection. [Make sure there are 1GB space available]
3. Disconnect USB connection and boot up MR1, make sure time is set at present and LAN is connected.
4. In Windows, go to the Start menu, select Run,at the command line type "telnet 192.168.0.101" [Assume MR1's IP address is 192.168.0.101]
5. Venus login : root
6. Password : AVMMR1 [case-sensitive]
7.~# /usr/local/etc/hdd/volumes/HDD1/first [MR1 will reboot after enter]
8. MLDonkey will auto start while boot up, if you don't need it, just rename mldonkey.sh in Service folder.


Note :

1. Default MLDonkey login ID is admin and PW is 1234
2. BT download is disabled in Mldonkey by default, you would need to enable it first, type "x.x.x.x:4080" in IE to access Mldonkey with WebUI, or use Sancho application as GUI connects to MLDonkey(Recommanded).
3. The image is tested with F/W version 1.08



Warning : Use it with your own risk. If something wrong casue the device not function correctly, you might have to do firmware update which will ease all data in the hard disk.

MR1's Google Groups

Create any topic related to MR1.

Go to MR1 Google Groups

Firmware available at Emprex web site

Warning :
All data in the HDD will be erased after F/W
update, please transfer all recorded media to
Multi Media Disk(FAT32 partition) and back up
whole Multi Media Disk through USB
connection.

There are two firmwares, one for PAL TV tuner system and the other one for NTSC TV tuner system. Make sure you have download the right one, otherwise it won't work.

Firmware update procedure  

Version MR1_P1.08.K3

                      PAL system

                      NTSC system